46 Lambda 265, 365 and 465 ASX-260/280 AND ASX-520/560 Autosampler Users Guide
8. Click Blank icon.
9. The probe will move to the blank position and start sucking, and after filling up the
flow cell, the blank will be measured.
10. Click Sample icon.
11. The probe will move to the first set sample position and start sucking and after filling
up the flow cell and the sample will be measured. The sample measurement will
continue until the last sample measurement is completed.
12. Save or print the results after all the measurements are finished.
To Next Page
Loading...
Need help?
General
