Functional description
This section describes the functionality of the TriNEST Microplate incubator and shaker instrument.
Physical description
You can use the instrument as a single unit into which up to three microplates of standard size and height (For details,
see Specifications and features on page 19) can be loaded at a time. All three incubation chambers are controlled by
the same program, they cannot be programmed independently. However, you can stack up to three instruments, giving
a total capacity of nine plates. Each instrument in the stack operates independently according to its own program.
Microplates fit into the removable plate holders that are supplied with the instrument.
TriNEST Microplate incubator and shaker
Functional description
9
To Next Page
Loading...
Need help?
General
