User’s Handbook, TSL 4230, Issue 4 17
3
4016-E61TRS
Operating instructions 3
Introduction
Information for the mechanical maintenance of the 4016-E61TRS gas engine is given in this User’s Handbook
(TSL 4230) and the Workshop Manual (TSL 4235).
Information on the EMS system which controls all functions on the engine, including oil circuit priming, starting
and stopping sequences is given in the OEM Application, Installation and Commissioning Manual (TSL 4232)
and the Diagnostic Manual (TSL 4233) issue 3.
These publications should be understood and used together for the safe operation of the engine.
Note: For oil and coolant details refer to Chapter 5, Gas and engine fluids specification.
This document has been printed from SPI². Not for Resale
To Next Page
Loading...
