4
32 User’s Handbook, TSL 4230, Issue 4
4016-E61TRS
How to change the air filter element and clean the gas mixer
1 Release the five over-centre catches (A1) and remove the air filter end cover (A2).
2 Pull out the filter element (A3).
3 Clean any dust accumulation from inside the air filter body and the gas mixer (A4) using a clean cloth. If
necessary remove the coupling hose (A5) to give access.
4 Fit a new filter element into the filter body.
5 Fit the end cover locating it in the filter element and on the filter body, then lock down the over-centre
catches.
This document has been printed from SPI². Not for Resale
To Next Page
Loading...
