Permobil C500 - Charger Socket

Owner´s Manual Permobil C500 Design and Function
39
Charger Socket
This socket should only be used for charging or locking the wheelchair. Do not
connect any type of programming cable into this socket This socket should not
be used as a power supply for any other electrical device. Connection of other
electrical devices may damage the control system or affect the E.M.C. perfor-
mance of the wheelchair.

WARNING
The wheelchair’s warranty will be voided if any device other than a battery charger supplied with the
wheelchair, or the lock key is connected into the control panels charger socket.

NOTE
To achieve a faster and more effective charging, we recommend to use the wheelchair´s
charging socket on the chassis. See page 57.