Explorer Mini Electromagnetic compatibility
8.3 Recommended separation distance
Guidance and manufacturer´s declaration
The Explorer Mini and the battery charger (PF2401A5SL) are intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the Explorer Mini and the battery charger (PF2401A5SL) can
help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the Explorer Mini and/or the battery charger (PF2401A5SL) as recommended below, according to
the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
Recommended separation distance according to frequency range of the transmitter
Explorer Mini Battery charger (PF2401A5SL)
80 MHz–800
MHz
800 MHz–2.5
GHz
150 KHz–80
MHz
80 MHz–800
MHz
800 MHz–2.5
GHz
0.01 W 018 m 0.035 m 0.12 m 0.12 m 0.23 m
0.1 W 0.056 m 0.11 m 0.37 m 0.37 m 0.73 m
1 W 0.18 m 0.35 m 1.2 m 1.2 m 2.3 m
10 W 0.55 m 1.1 m 3.7 m 3.7 m 7.3 m
100 W 1.8 m 3.5 m 12 m 12 m 23 m
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d
in meters (m) can be
estimated using the equation applicable to the frequency of the transmitter, where
P
is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
138
To Next Page
Loading...
