Permobil Explorer Mini - Installing the Seat

Explorer Mini Adjustments
4.1.3 Installing the seat
The center of gravity is affected when the seat is installed.
The table and backrest unit must be in the highest position before
you can install the seat. Otherwise there will not be enough space to
install the seat.
1. Put the table and backrest unit in its highest position. For
instructions on how to adjust the height of the table and backrest
unit, see 4.2.1
Adjusting the height of the table and backrest unit .
Figure 32. Remove the tightening knob from the column.
2. Remove the tightening knob from the column.
68