Explorer Mini Handling and driving
Figure 52. Procedure for locking.
1. Make sure that the Explorer Mini is turned on.
2. Press and hold the on/off button for one second until a beep
sounds.
3. Push the joystick forward until a beep sounds.
4. Pull the joystick backward until a beep sounds.
5. Release the joystick. A beep sounds and the Explorer Mini is
locked for driving.
5.7.2 Unlocking
The Explorer Mini is unlocked with the steps below. Step 4 and 5
must be done swiftly, otherwise the procedure gets interrupted and
you must start again from step 2.
91
To Next Page
Loading...
