Perry Daily - Temperature Scale; Warnings

G
B
432
OFF = degrees centigrade
(correct setting)
1
ON
Microswitch on the back of the chronothermostat (
) is set in the factory to (degrees centigrade), if it
accidentally gets moved into the position the display will
show the temperature in degrees Fahrenheit.
To go back to the correct view in degrees centigrade (corre-
sponding to the scale printed on the adjustment knobs), put
microswitch back into the position and do a
The chronothermostat will be ready for programming again
(see Chapter 11).
4
OFF
ON,
4 OFF
IF
PRESENT
RESET.
15 - TEMPERATURE SCALE 16 - WARNINGS
If the display shows an ambient temperature of 00,0 °C or
50,00 °C blinking, it means that the measured temperature
is off the scale
CAUTION:
The chronothermostat is set in the factory for
working in the Celsius scale (degrees centigrade)
and it cannot be modified by the installer or user.



Use only 1,5V AA alkaline batteries LR6, using
inappropriate batteries may cause the entered
programming to be lost.
If necessary, clean the chronothermostat with
a slightly moist cloth.
The manufacturer reserves the right to make all technical
and manufacturing modifications deemed necessary
without prior notice.
N.B.: The product has been tested and it ensures its
characteristics with DURACELL or ENERGIZER alkaline
batteries.
22
Please read this instruction booklet carefully and keep it for
future reference.