Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles 11/27
DISPLAY FUNCTIONS
1. Clock.
2. Outside temperature gauge.
3. Milometer/Tripmeter.
4. Fuel gauge/Fuel reserve gauge.
5. Maintenance indicator.
A.Display control knob.
1. Setting the clock
The counter must be on the total kilometers.
Ignition on, press the control button (A) until the ti
me
f
lashes.
• Set the time by successive pushes on the control
button.
Pressing the control button for more than 2 seconds will
make the first digit of the minutes flash.
• Change the minutes by successive pushes on the
control button.
Pressing the control button for more than 2 seconds will
make the second digit of the minutes flash.
• Change the minutes by successive pushes on the
control button.
Press the control button for more than 2 seconds to
confirm the clock setting.
2. Outside temperature gauge
• The temperature shown is that read on the front of the
vehicle.
• The "risk of black ice" symbol comes on as soon as the
temperature falls below3°C.
3. Milometer
The tripmeter displays and stores the number of
kilometres travelled by the vehicle. The machine total
kilometres remains in the memory when the battery is
disconnected.
Tripmeter (TRIP)
The tripmeter displays and stores the number of
kilometers travelled during a given period. The vehicle's
daily mileage remains stored, even when the battery is
disconnected.
Changing from the total distance display to the daily
distance display
• With the ignition on, switching from the total distance
display to the daily tripmeter and vice-versa is done by
briefly pressing the control button (A).
Resetting the tripmeter
• With the ignition on, resetting the daily tripmeter is done
by pressing the control button (A) for more than
(3) seconds.
4. Fuel gauge/Fuel reserve gauge
When the tank is full:
• All of the fuel level indicator segments are lit.
• The "pump" symbol is displayed.
The min. and max. levels are indicated by the letters
E and F.
The fuel reserve gauge is shown by the last 2 segments
flashing (r):
• 1st level: the first two segments flash.
• 2nd level: the first segment flashes.
When the tank is empty, all the segments on the fuel
gauge are off and the "pump" symbol flashes.
1
2
3
4
A
5
If all the segments flash, the diagnostic
function has detected an anomaly on the
fuel gauge system. The system must be
checked by an authorised dealer.
To Next Page
Loading...
Need help?
General
