Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles 13/27
CONTROLS
1. Horn switch.
2. Dipped lights/Headlights switch.
The dipped lights/headlights switch has 3 functions.
A.High beam.
B.Dip beam.
C.Flashing the lights (Passing).
3. Indicators switch.
To indicate a change of direction, press the switch:
• Either to the right.
• Or to the left.
To stop the indicators flashing, press the switch.
4. Starter switch.
5. Hazard warning light switch.
The hazard warning lights can only be switched on with
the ignition in the ON position.
The hazard warning lights are automatically deactivated 1
hour after the ignition is switched off to save the battery.
KEY-OPERATED IGNITION SWITCH
FUNCTIONS
A.Engine off position.
The engine is off. Power to the electrical circuit is off. The
key can be removed.
B.On position.
Power to the electrical circuit is on. The engine can be
started. The key cannot be removed.
C.Steering unlocked.
Power to the electrical circuit is off. The handlebars must
be turned to the left, while the key must be
simultaneously pushed in and turned to the left. The key
can be removed.
D.Opening the saddle.
Action of the key in this position allows you to open the
saddle with a cable device.
To Next Page
Loading...
Need help?
General
