Pfaff 1053 - Thread Tension Release

Adjustment
11 - 26
11.06.06 Thread tension release
Requirement
When the release olive 3 is resting on the highest point of the cam 4, the distance
between the tension disks 7 must be at least 0.5 mm.
Fig. 11 - 25
● Press the roller of the roller level 1 over the magnet into the lowest point of the control
cam 2.
● Turn the hand wheel in the rotating direction until the release olive 3 is resting on the
highest point of the cam 4.
● Turn screw 5 (nut 6) according to the requirement.
5
2
1
3
4
6
0.5 mm
7