7 - 5
Controls
110-008
110-010
7.09 Setting the straight stitch
The straight stitch may only be
set if no zig-zag stitch has been
selected. Danger of damage to
the machine!
● Set the position of the needle bar frame
by tightening adjusting screw 1.
Fig. 7 - 09
7.10 Knee lever
● Depending on the type of assembly, by
pressing knee lever 1 either the presser
foot is raised or the zig-zag stitch width
altered.
Fig. 7 - 10
1
1