Adjustment
12 - 22
12.07.02 Example of a parameter input
● Switch on the machine.
● Press the TE/Speed key twice to select the input mode.
2 x
● By pressing the corresponding plus/minus key select parameter "798" and the user level
"B", see Chapter 12.07.01 Selecting the user level.
● Select parameter "607" by pressing the corresponding +/- key.
● Select the required value for the speed by pressing the corresponding +/- key.
● By pressing the TE/Speed key the selected value is taken over and the machine switches
to the sewing mode.
TE
607 1200
TE
798 1
B
B
TE
101 on
A
To Next Page
Loading...
