Adjustment
12 - 23
1 101 Control panel key tone A on - off on
6 605 Speed display B, C on - off off
607 Speed B, C 300 - 3200 1200
609 Cutting speed 1 B, C 60 - 300 180
618 Reverse B, C on - off on
660 Bobbin thread control A, B, C 0 - 2 0
0 = off
1 = thread monitor
2 = reverse counter
7 700 Needle position 0 B, C 0 - 255
(needle reference position)
702 Needle position 1 (needle lowered) B, C 0 - 255 80
703 Needle position 2 (take-up lever raised) B, C 0 - 255 226
705 Needle position 5 (end of cutting signal 1) B, C 0 - 255 200
706 Needle position 6 (start of cutting signal 2) B, C 0 - 255 80
707 Needle position 9 B, C 0 - 255 164
(start thread tension release)
718 Stop brake B, C 0 - 100 8
798 User level A, B, C 0, 1, 11 0
0 = User level
1 = Mechanic level
11 = Service level
799 Selected machine class C 1 - 5 5
8 800 Rotating direction C 0 - 1 0
0 = 1183-712/..
801 Reverse angle B, C 10 - 212 20
12.07.03 List of parameters
Further parameters are listed in the Motor instruction manual.
Group
Parameter
Setting
range
Set
value
User
level
Description
To Next Page
Loading...
