9
Spool holder
Before placing thread cones/spools on
machine you must pull the spool holder 34
fully away from the back of machine.
Telescopic thread guide
Pull the telescopic thread guide 32 upwards to
its highest position.
To ensure optimum thread feed, turn the tele-
scopic parts slowly until you hear the locking
balls fl ick into place.
Thread unreeling disc
The thread unreeling disc (in the accessory
box) is used for small spools/spools with
notched or rough ends. Place the spool on the
spool pin 35. Place the thread unreeling disc on
top of the spool. Make sure the spool disc 37 is
used under the spool.
To Next Page
Loading...
Need help?
General
