60
Changing the light bulb
Turn off the electrical power
Using the screw driver in the accessory box
loosen the fastening screw to the sewing light
cover 16 until the cover can be removed.
Push the light bulb fully into its socket. Rotate
counter clockwise through half a turn and
remove.
Guide the new light bulb (max. 15 W) into the
socket and twist until both pins on the bulb
click into place. Press the bulb right into the
socket, twisting it clockwise until it is securely
fi xed.
Replace the sewing light cover and tighten the
fastening screw.
To Next Page
Loading...
Need help?
General
