12
Needle position
This machine has 4 needle positions and can
sew with a maximum of two needles at any
one time. The needle positions are L1, L2, R1
and R2. The fastening screw is located directly
above the corresponding needle.
The different needle positions are depicted in a
schematic drawing in the instruction manual.
Also refer to the examples above and below.
Insert the needle(s) as shown on the program
overview (see pages 40-43).
Note: If the needles R2 and L1 have been in-
serted, the left needle will be somewhat higher
than the right needle.
Note: If the needles L1 and L2 have been
inserted, the left needle will be somewhat
lower than the right needle.
To Next Page
Loading...
Need help?
General
