14
Threading the thread guides
Place the spools on the spool pins 35. You will
fi nd information on the thread net, thread
unreeling disc, spool disc and cone thread
adapter on pages 9 and 10. Thread through the
thread guides 31 from the back to the front fol-
lowing the colored threading paths.
Lift the carry handle 3 upwards. Thread
through the underside of the carrying handle
and through the rear thread guides 44 using
both hands to pull the thread down until it
slips under the thread guide. Guide the thread
through the tension discs and pull it down
until it is positioned fi rmly between the tension
discs. Return the carrying handle to its original
position.
Note:
Thread in a sequence of 1 to 5.
To Next Page
Loading...
Need help?
General
