Pfaff Creative 7530

Sewing on buttons
With program 09 you can sew
on two- or four-
hole
buttons without any problems.
•
Remove
the sewing foot and lower
the bottom
feed.
• Place the button
on the place marked.
•
Turn the handwheel towards
you and
position
the button
so
that the needle
enters
the left
hole in the button.
•
Now lower the presser foot
lifter;
the
button is
now held by the sewing
foot holder.
•
Now sew
on the button. Make
sure that the
needle also enters the right
hole in
the button.
•
The
machine sews
a
tack and
the program
is
completed.
When selecting sewing help
with the “display”
key the upper display line
shows “lower’
i.e. you
are reminded that the
bottom feed must
be
lowered.
• Remove
the match and pull
the button and
fabric
apart.
• Wrap the
shank with sewing thread
and knot it.
Sewing on buttons with thread
shanks
•
Insert
the sewing foot
•
Place
a match between the holes of the
button and sew it on
as
described
on
the
left.
U)
UI
t
P1
101