Pfaff Creative 7530

Hems
with the
twin needle
Prog.
00
You
can sew
professional
hems quickly
and easily
on
stretch fabrics
such as
T-shirts,
knits or bicycle
shorts
with
the twin needle.
The twin
needle is
available
in various
widths. The
normal width
for
top stitching
is
4 mm.
Before
switching
on the
prog.
00,
press key
2
“twin needle”.
• First iron
the
hem crease
at the desired
width.
•
Then sew
through the
hem from
the face
side
of
the fabric.
• Finally cut
the
overhanging
edge
of
the
hem
up
to
the seam.
Tip:
For
difficult fabrics
such
as
ribbing
knits
it is
advisable
to
baste
the
hem over
before sewing.
q)C
o
0
o
.‘
iii
33
Threading
the twin
needle
Replace
the sewing
needle
with the
twin
needle.
•
Swing
the second
spool holder
up and place
one
spool onto
each spool
holder.
• The
tension
disk
a
is
in the threading
slot
(33).
Take
care when
threading
that
one of
the
threads passes
on the left
and the other
on
the
right
of the tension
disk.
•
The threads
are the threaded
as usual,
taking
care
that they
do
not
get
twisted
with
each
other.
• Pull
the threads
into
the right and
left thread
guide
(32) respectively
and
thread the
needles
121