Pfaff Creative 7530 User Manual

•
Place
the gimp thread over the front ridge.
Pull the thread ends taut
backwards under the
sewing foot. Clamp them right and left
of the
back ridge respectively.
•
Before you start sewing,
press the “needle
down” key (4).
•
Sew the
first buttonhole seam.
U)
a)
z
=
c_) -=
0
40
O
4-’ ‘-
ii
0=
119
II
Keyhole
buttonhole with gimp thread
mark,
•
Push the runner
forwards
up
to the
second red
h
•
When
the machine sews the first stitches of
the
eyelet, pull down the gimp thread from the
back ridge
using an ordinary pin.
Important: The sewing foot may not be raised
during this
procedure!
• Pull the
gimp thread to the left and backwards
until the loop is just
in front of the needle.
•
Now sew the eyelet
carefully.
• Then, hold the gimp thread
slightly tauter and
finish sewing the buttonhole. Cut
off the loose
ends of the gimp thread.
The round buttonhole with gimp
thread is
sewn in the same way.
L

Pfaff Creative 7530 Specifications

General

Brand	Pfaff
Model	Creative 7530
Category	Sewing Machine
Language	English