Pfaff Creative 7530

Bias tape
binder
Binding with bias tape
is
a
very
easy
method of
giving fabric edges a
smooth and neat appear
ance. For
this
you
need unfolded bias tape about
24 mm
(one inch> wide.
•
Remove the sewing foot holder and the
sewing
foot and screw on the binder.
•
Cut the beginning
of
the bias tape at a
diagonal.
• Push the tape
into
the
scroll of the binder and
pull out to the back.
• Adjust the binder so that the needle enters at
about 1 —1.5 mm (1/1 6”) from the folded-in
edge
of the bias tape. This can also be achieved
by
changing
the
needle position.
•
Stitch a few
centimetres (about an inch> along
the bias tape.
• Insert the edge to be bound into the
slot of the
binder. The raw edge must be placed
between
the
bias tape
edges.
The bias tape encloses
the raw edge
automatically.
Tip:
You can obtain an additional effect by
using
zigzag
stitches or fancy stitches.
Program: 00
Stitch length: 2.5
Tension:
3—5
168