Pfaff Creative 7530

1.
Seam is sewn
unevenly
ihe tension needs
adjusting.
Thread is too
thick, slubbed
or hard.
The
bobbin
thread is
unevenly
wound.
Thread loops
above or
below
stitches.
5.
The
machine does
not feed or feeds
irregularly
3ewing
lint
has collected
between
the feed
dog
eeth rows.
:eed
dog
is lowered.
Slide B (see
page
31)
s at
right.
3.
Machine binds
oose
threads in
the hook race:
Check needle-thread
and
bobbin-thread tensions.
Use only
quality threads.
Do not wind
free-hand. Run
the
thread through
the
primary tension.
Thread up
correctly.
Check
needle-thread
and
bobbin-thread
tensions.
Remove needle plate,
remove lint
with brush.
Push
slide B (see page
31) to the
left.
Remove
loose thread
and apply one drop
of
oil
to the hook.
7
Machine
does not
sew
the
entered
program
witch off
the machine and back on
again after about
10 seconds. Enter
desired program
again.
mportant
notes:
3efore
changing the sewing feet
or needles,
you
must
switch off
the on/off
switch.
)o not
start the
threaded
machine
without
fabric in it,
f you
leave the
machine, even for
a
short
time,
do
not forget to
switch
off
the on/off
switch.
This is
especially important
when children are nearby.
E
0,2
175
COrn