Pfaff select 1520 - Winding through the Needle

7
D
Operate your Pfaff select
Winding through the needle
Even if the machine has been completely
threaded, you can still wind the bobbin.
Raise presser foot lifter (19). Pass the
needle thread through the presser foot and
downwards; then through the right threading
slot (11) and upwards.
Now, pull the thread into the take-up lever
from left to right (9). The take-up lever must be
positioned at its very top.
Pass the thread to the right under the guide
hook D. Then wind the thread several times
around the bobbin. Press the foot control and
winding the bobbin.
Don’t forget:
Make sure to stop the needle from moving
while winding the bobbin (see page 4).