17
Operate your Pfaff select
Reverse sewing
The machine sews in reverse only as long as
the reverse sewing button (20) is pressed.
Stitch length adjustment dial
With the stitch length adjustment dial (21) you
can adjust the stitch length between 0 and 6
mm by turning the point marking on the button
to the required length.
Between the numbers 0 and 1 you will fi nd the
“buttonhole” symbol. This area is the optimum
stitch density for sewing buttonholes and
embroidering.
The further you turn the dial to 0, the higher the
density of the stitch.
To sew stretch stitches (dark background), you
must turn the stitch length adjustment dial (21)
as far as it will go in the grey area.
To Next Page
Loading...
