Introduction
Accessories and needles 55-56
Accessory tray 3
Appliqué 51
Appliqué foot 62
Bias-tape binder 61
Blind stitch 25
Bobbin case 8-9
Buttonholes 33, 51
Changing the needle plate 68
Changing the needle 15
Cleaning and oiling 68
Closed overlock stitch 29
Cording foot 62
Covering stitch 30-31
Darning with the elastic stitch 38
Darning with the straight stitch 37
Darning 37-38
Decorative sewing 47-54
Drawing up the bobbin thread 12
Dropping the feed dog 15
Elastic stitch 27
Elastic stitches 26-29
Electrical connection 2
Embroidering with a dense
zigzag stitch 48-51
Eyelet embroidery 52
Feather stitch 30
Felling foot 59
Free arm 3
Fringe foot 63
Gathering foot 59
Gathering with elastic thread 36
Gathering with the straight stitch 36
General information on sewing 23
Handwheel release disk 4
Hemming with the twin needle 35
Hemstitch seam 54
Honeycomb stitch 27
Inserting lace 43
Integrated Dual feed / IDT 14
Left needle position 16
Main switch 2
Maintenance and
trouble-shooting 67-70
Monograms 48
Needle table 64-65
Needle thread tension 15,23
Needle threader 11
Non-elastic stitches 24-25
Oiling the sewing machine 68
Open overlock stitch 28
Optional accessories 58-66
Overlock stitches 28-29
Patchwork quilt 53
Pennant stitch 31
Placing sewing thread on
spool holder 5
Practical sewing 21-44
Presser foot lifter 13
Pullover stitch 29
Pushbutton controls 18
Contents
To Next Page
Loading...
