Pfaff select 1520 User Manual

61
1540
1530
1520
1540
1530
1520
Accessories and needles
Ruffl er
With the ruffl er you can make closely or widely
spaced pleats automatically while sewing. This
is very useful for ruffl es, home decorating, etc.
The ruffl er can be used in three different ways:
1. Folding pleats in fabric.
2. Folding and securing pleats in fabric in one
operation.
3. Folding and securing pleats in fabric, while
attaching lace in one operation.
When you buy the ruffl er from your PFAFF
dealer, full operating instructions are included.
Bias tape binder
Binding with bias tape is a very easy method
of giving fabric edges a smooth and neat
appearance. For this you need unfolded bias
tape about 1'' (2.5 cm) wide.
• Remove the presser foot and holder. Attach
the bias binder.
• Cut the beginning of the bias tape at an
angle.
• Feed the tape into the scroll of the binder
and pull out to the back.
• Adjust the binder and/or the needle position
so that the needle pierces the fabric
approximately 1/16'' (1-1.5 mm) from the
folded edge of the bias tape.
• Stitch about 1'' (2.5 cm) along the bias tape.
• Insert the edge of the fabric to be bound
between the bias tape edges into the slot
of the binder. The bias tape will enclose the
raw edge automatically during sewing.
Tip: You can obtain an additional decorative
effect by using a zigzag stitch.
stitch
G
E
E
0
0
0
2,5
2,5
2,5
3-5
3-5
3-5
Bias
tape
binder
stitch
G
E
E
0
0
0
3
3
3
3-5
3-5
3-5
Ruffl er

Pfaff select 1520 Specifications

General

Brand	Pfaff
Model	select 1520
Category	Sewing Machine
Language	English