Pfaff select 1520 - Pulling up the Bobbin Thread; Drawing up the Bobbin Thread; Thread Cutter

12
Operate your Pfaff select
Drawing up the bobbin thread
Turn off the main switch
Raise the presser foot. Hold the needle thread
and turn the handwheel towards you until
the needle is at the top again and the bobbin
thread has formed a loop. Pull the needle
thread to draw up the bobbin thread.
Bobbin thread
Close the bobbin case/hook cover and pull the
thread under the presser foot to the left.
Thread cutter
Pull the threads from the back to the front
over the thread cutter (12).