ENG
Operating Manual | Attachment and Installation Cooling Units | Standard Controller (SC) – 400 V, 2~ | 086100115 9/68
2.2 Foreseeable misuse
The following points describe a foreseeable misuse of the unit:
• Use of the unit as a storage place, work platform.
• Attachment of transport aids.
• Installation in unsuitable locations.
• Outdoor operation.
• Operation outside of the permissible technical data. See section "Technical data".
• Operation without or with damaged sub-assemblies which serve for the safety of persons and the unit/plant.
• Use of cooling media not listed and approved in the "technical data".
• Cooling of media and objects not intended for operation of the unit.
• Blocking of the ambient air inlets and outlets by set down objects for example.
2.3 Duty of the operator
• The operator must ensure that the cooling units are only used for their intended purpose and that all hazards pertaining
to the life and health of users or third parties are avoided. The accident prevention guidelines and safety regulations must
also be observed.
• Unit faults must be responded to immediately.
• The owner must ensure that all users have read and understood this operating manual.
Non-compliance with this operating manual will void the warranty. The same applies if improper work has been carried out on
the unit by the customer and/or third parties without the consent of the manufacturer.
To Next Page
Loading...
