Delivery, transport and storage
16 | 40 Operating instructions Sortimat | Edition 1
Unpacking
Open the packaging to avoid damage to the housing and other components.
Sortimat
Sieve stack
Accessories
Remove the both PE foam padding at the side.
Lift the SORTIMAT out of the box using its
carrying handles attached at the sides.
Note that the weight is approx. 27 kg.
Open the packaging with the sieve stack.
Remove the both PE foam padding at the side.
Lift the sieve stack out carefully.
Move the SORTIMAT to the installation location, paying attention to the setup instructions in chapter
5.1.
Keep the original packaging.
Packaging for return delivery
If possible, use the original packaging and the original packaging material. If neither is available any
longer, request new packaging from Pfeuffer GmbH.
To Next Page
Loading...
