Pfeuffer Sortimat K3 - Supplements and Accessories

Supplements and accessories
36 | 40 Operating instructions Sortimat | Edition 1
11 Supplements and accessories
Sample cleaner SLN 3
The sample cleaner SLN 3 is used for determining the total dockage and
sorting grain-
like crops. The proportion of impurities (coarse and fine
constituents, aspiration output) as well as the proportion of small grain
and quality cereal can be
determined by means of a sample directly on
arrival.
Figure 17: Sample cleaner SLN 3
Product
Article no.
Broken and round grain separating device for wheat
2440 0021
Broken and round grain separating device for barley and rye
2440 0020
Clamping bracket for separating device
3175 2410
Collecting tray for separating device
3110 2410
Collecting tray for malt
2440 0022
Nozzle gage (hole gage) for checking the nominal hole widths
1249 0020
Riffle sample divider EBC (other models available)
1745 0020
Sample cleaner SLN 3 (other models available)
1740 0040
Analysis sieves (brass or sheet steel)
Available sieve sizes:
Nominal hole width in mm:
Slot/slit perforation
1.0
1.2
1.25
1.3
1.4
1.5
1.8
1.9
2.0
2.1
2.2
2.25
2.3
2.4
2.5
2.6
2.75
2.8
3.0
3.25
3.3
3.5
4.0
Round hole
1.0
1.4
1.5
1.7
1.8
2.0
2.45
2.5
3.0
3.15
3.25
3.65
4.0
4.25
4.5
4.75
5.25
5.5
Dummy sieve (sheet without perforations)