Pfeuffer Sortimat K3 User Manual

Safety
Edition 1 | Operating instructions Sortimat 9 | 40
2 Safety
NOTE
It is strictly prohibited to deactivate the safety devices or modify their mode of effect.
2.1 Built-in safety systems
The built-in safety systems must be checked at regular intervals with the corresponding test methods, see
the following table:
Test intervals
Test methods
d = Daily
w = Weekly
m = Monthly
¼ y = Every three months
½ y = Every six months
y = Yearly
V = Visual check
F = Function check
M = Measurement
2.1.1 Mains disconnector in a portable device
The main switch ON/OFF is the mains disconnector, and also serves as the EMERGENCY OFF function. It
is located on the top of the device.
The connection for the mains cable (C19/C20 coupler) is located at the rear.
 In an emergency, switch off the SORTIMAT using the main switch, position OFF.
 Disconnect the mains cable from the electrical power supply, or pull out the coupler.
 Secure the mains cable appropriately against unauthorized reconnection by placing
it where it can be monitored continuously.
Arrange the plug/socket combination at the place of installation so that it can be
observed clearly and reached quickly in an emergency.
Test
Interval
Method
y
F
2.1.2 Protective covers
The SORTIMAT features protection against reaching into the machine, in the form of the complete
housing.
Test
Interval
Method
m
V

Pfeuffer Sortimat K3 Specifications

General

Brand	Pfeuffer
Model	Sortimat K3
Category	Laboratory Equipment
Language	English