PG DRIVES TECHNOLOGY S-DRIVE - PROGRAMMING
SK76745/10
It is the responsibility of the scooter manufacturer to ensure a safe stopping distance is
maintained in the event of reduced braking current. PGDT accepts no liability for losses of any
kind arising from failure to comply with this condition.
8.10 Enhanced Motor Compensation (Up), Enhanced Motor Compensation (Down), Enhanced Motor Compensation
(Up) Gain,
These parameters allow fine-tuning of the scooter’s gradient performance, i.e. minimizing rollback when starting and stopping on
a slope. Refer to Appendix B – Set-up Procedure for full details of adjusting these parameters.
9 Memory Functions
9.1 Read System Log
The S-Drive has a diagnostic log facility that stores the number of occurrences of the last eight detected system problems. This
allows you to view the contents.
9.2 Clear System Log
This function clears the S-Drive’s diagnostic log.
9.3 Read Timer
The S-Drive has a timer which records how long the scooter is in use. The timer runs whenever the throttle is moved into a drive
state, and stops when the throttle is returned to the home position. The timer records the number of hours the scooter has been in
drive for.
9.4 Clear Timer
This function resets the S-Drive’s timer.
To Next Page
Loading...
