PGO BR-500 - Page 48

.
020360Y
30-mm guide 020483Y
- Insert the intermediate
shaft bearing on the cover
by the specific tool.
N.B.: Place it with the
balls facing the hub
(this applies to
bearings with plastic
cage).
Specific equipment
and tools:
Handle 020376Y
Adapter 52x55 mm
020360Y
20-mm guide 020363Y
- Heat the bearing seats on
the cover using the thermal
gun.
- Support the hub cover using
the column kit.
Specific equipment and
tools:
Heater 020151Y
Column kit 020476Y
PGO BR-500 ENGINE
P.10-29
Final Reduction