Phanteks NV7 - Power Supply Installation; Insert and Secure PSU

26 27
INTERNAL CABLE MANAGEMENTINSTALLING STORAGE
01. Remove the 2.5’’ drive bracket completely.
02. Install 2x 3.5’’ drives with cables routed to
the top
01. Reposition the 2.5’’ drive bracket to the rear
of the motherboard.
02. Install 2x 2.5’’ drives on the door and 2x 2.5’’
drives on the bracket
BOTTOM DOOR STORAGE
The bottom door can be used for
one of the following storage options:
1x 3.5’’ + 4x 2.5’’ | 4x 2.5’’ | 2x 3.5’’
Loosen the thumb screw to open the door.
01
OPEN BOTTOM DOOR
02
INSTALL DRIVES
OPTION A- 1X 3.5’’ + 4X 2.5’’
OPTION C - 2X 3.5’’OPTION B - 4X 2.5’’
PSU CABLE MANAGEMENT
MB
GPU
CPU
The PSU cables can be routed like the image
below for clean cable management. Open the
top cover door to loop the CPU & MB cables to
get rid of excessive cable length.
Loop excessive cable length on the inside of the
top cover door.
to MB
to MB
to MBto PSU to PSU