PHICOMM M1 User Manual

11
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
7) Select Use the following IP address and Use the following DNS Server addresses, the IP
address put in 192.168.0.X (like 192.168.0.100), the Subnet mask put in 255.255.255.0, the
Default gateway leave it blank, then click OK, and then click OK again.
8) Right click on Wireless Network Connection again, choose Connect/Disconnect.

PHICOMM M1 Specifications

General

Brand	PHICOMM
Model	M1
Category	Wireless Router
Language	English