www.phicomm.com
Advanced Wireless Settings
This section is to configure the advanced wireless setting of the Router, if you are not familiar
with the setting items in this page, it’s strongly recommended to keep the provided default
values, otherwise it may result in lower wireless network performance.
Beacon Interval: The interval for sending packets of the Beacon frame. Its value range is 20-1000
in unit of ms. The default is 100.
DTIM Interval: It indicates the interval of the delivery traffic indication message (DTIM). The
value range is between 1 and 255 milliseconds. The default value is 1.
Fragment Threshold: Set the fragmentation threshold. Packets larger than the size set in this
field will be fragmented. Too many data packets will lower the wireless network performance.
The Fragment Threshold value should not be set too low. The default value is 2346.
RTS Threshold: Set the RTS (Request to send threshold.) threshold. When the packet size is larger
than the preset RTS size, the wireless router will send a RTS to the destination station to start a
negotiation. The default value is 2347.
Enable WMM: If you select it, the router will process the packets with the priority first. You are
To Next Page
Loading...
Need help?
General
