PHICOMM M1 - Wireless Settings

29
Chapter 4: Router Configuration
Wireless Nano Router
www.phicomm.com
Wireless Settings
Wireless MAC Address Filter
You can allow/deny the computers connecting to the router wirelessly by entering the MAC
address with this feature.
If you only want MAC address (00:0A:EB:00:07:5F) to access the Wireless Network while others
cannot:
1. Choose Allow for the security policy.
2. Fill MAC address 00:0A:EB:00:07:5F in and click Save.
If you want MAC address (00:0A:EB:00:07:5F) cannot access the Wireless Network while others
can:
1. Choose Deny for the security policy.
2. Filling MAC address 00:0A:EB:00:07:5F in and click Save.