Philips 190CW9FB/69 - Ambient Temperature: 0 °C - 40 °C; Electrical Characteristics; Interface Signals; Scanning Frequencies

190CW9 LCD 57
General Product Specification
ʳ
ʳʳʳʳ
ʳʳʳʳʳʳʳʳ
ʳʳʳʳʳ
ʳʳ
ʳ
ʳ
2.2 Scanning frequencies
Hor. : 30 – 83 K Hz
Ver. : 56 - 76 Hz
Video dot rate : <140 MHz
Power input : 90-264 V AC, 50/60 ± 2 Hz
Power consumption : < 36W ( Typ.)
<40 W (Max.)
Functions:
(1) D-SUB analog R/G/B separate inputs, H/V sync separated, Composite (H+V)
TTL level, SOG sync
(2) DVI digital Panel Link TMDS inputs
2.3 Ambient temperature: 0 °C - 40 °C
3 Electrical characteristics
3.1 Interface signals
1). D-Sub Analog
Input signal: Video, Hsync., Vsync
Video: 0.7 Vp-p, input impedance, 75 ohm @DC
Sync.: Separate sync TTL level , input impedance 2.2k ohm terminate
Hsync Positive/Negative
Vsync Positive/Negative
Composite sync TTL level, input impedance 2.2k ohm terminate
(Positive/Negative)
Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive)
2). DVI-D Digital
Input signal: Single TMDS link (Three channels: RX0-/+, RX1-/+, RX2-/+)
3). USB PLUG support
Input signal: Upstream input (V
BUS
, D+, D-, GND) via USB-B receptacle.
Output signal: Downstream output (V
BUS
, D+, D-, GND) through USB-A receptacle
http://www.wjel.net