Philips 190CW9FB/69 - Acceptance Test; Display Disturbances from External Environment; Display Disturbances to External Environment; Environmental Characteristics

190CW9 LCD 73
General Product Specification
ʳ
ʳʳʳʳ
ʳʳʳʳʳʳʳʳ
ʳʳʳʳʳ
ʳʳ
ʳ
ʳ
A. Container loading for China and India
B. Truck loading
6 Environmental characteristics
The following sections define the interference and
susceptibility condition limits that might occur
between external environment and the display device.
6.1 Susceptibility of display to external environment
Operating
- Temperature : 0 to 40 degree C
- Humidity : 80% max
- Altitude : 0-3658m
- Air pressure : 600-1100 mBAR
Storage
- Temperature : -20 to 60 degree C
- Humidity : 95% max
- Altitude : 0-12192m
- Air pressure : 300-1100 mBAR
Note: recommend at 5 to 35°C, Humidity less than 60 %
6.2 Transportation tests
Refer to 5.15.2
6. Display disturbances from external environment
According to IEC 801-2 for ESD disturbances
6.4 Display disturbances to external environment
Reliability
.1 Mean Time Between Failures
System MTBF (Including the LCD panel and CCFL) : 50,000 hrs
Quality assurance requirements
.1 Acceptance test
According to MIL-STD-105D Control II level
http://www.wjel.net