Philips 190CW9FB/69 - Page 65

190CW9 LCD 65
General Product Specification
ʳ
ʳʳʳʳ
ʳʳʳʳʳʳʳʳ
ʳʳʳʳʳ
ʳʳ
ʳ
ʳ
.16.1.5 Linkage between Smart Image OSD and main OSD
A. Settings within main OSD have linkage with Smart Image OSD.
i. Brightness
ii. Contrast
iii. Color Temperature
B. Because each preset profiles will define default setting of these 3 parameters. Users can
understand what is the value of that in preset profile by open the main OSD.
C. When any SmartImage Lite profile had been enabled. The parameters in main OSD are
still available for user to adjust. But these adjustments are temporary only. If users switch to
another profile and then go back. The setting in main OSD will show preset values of that
SmartImage profile enabled.
.16.1.6 Profile Definitions (supplier to input at design stages)
A. Office Work
i. Purpose: Design for general office application, like word processing,
Spreadsheet and email. The screen is dominated by text.
ii. Enhancement point:
1. A little sharpness for increasing the details of e.g. an excel grid.
No other type of enhancement as it won't bring value.
2. Color temperature remains in 6500°K.
3. Brightness level should be 70%.
4. Smart Response set to “Off”.
5. Smart Contrast set to “Off”.
B. Image Viewing
i. Purpose: Design for image viewing application, especially in slide show.
The screen is dominated by picture. Powerpoint presentation could use
this profile also.
ii. Enhancement Point:
1. Dynamic contrast enhancement by histogram analysis (DLC)
should be off.
2. Sharpness and color to be enhanced 75%.
3. Color temperature 6500°K (or even 5500°K, but it should be
checked against the light output)
http://www.wjel.net