0.1 M4 19S4 / 19B4 19” 5:4 LCD Monitor
2011/11/10 PHILIPS 73 of 18
5.12 Texture/Glossing of housing
x The texture area and texture no should follow Philips make-up sheet.
x The exterior surfaces shall have a uniform texture.
x Philips must approve the mold texturing.
x Detail document for texture refer to “UN-D249”, “UN-D 600”.
x Glossy surface > = 80 gloss units
5.13 Tilt and swivel base – 19S4
x Tilt angle : -5 q +2/- 0 q (forward)
+20 q+ 0/- 3 q (backward)
x Swivel angle : nil
x High Adjustment : nil
x Portrait Display : nil
Tilt and swivel base – 19B4
x Tilt angle : -5 q +2/- 0 q (forward)
+20 q+ 0/- 3 q (backward)
x Swivel angle : +65 Ʋ 3 /-65Ʋ 3
x High Adjustment : 110±5 mm
x Portrait Display : -0.5°~-4°, 90.5°~94°( CW direction )
5.14 Kensington Lock
x Must meet Kensington_slot.spec “TYE-M0004”.
x MMD request metal plate in Kensington hole.
5.15 Product dimension / Weight (Refer to Philips approved SHT 191/SHT560 )
19S4L/19S4LA
x Product with Stand : 404 x 419 x 188 mm
x Packed unit dimension : 446 x 457 x 136 mm (WW)
x Net weight : 3.8 kg
x Gross weight : 4.9 kg
19S4LC/19B4LP
x Product with Stand : 404 x 394 x 227mm
x Packed unit dimension : 444 x 400 x 174mm (WW)
x Net weight : 4.8 kg
x Gross weight : 6.0 kg
To Next Page
Loading...
