Service Modes, Error Codes, and Fault Finding
EN 23LC9.3L LA 5.
2010-Mar-26
– Bootloader: Upgradable via USB in SAM (Note: must
be done by service personnel).
SW for all model numbers is loaded to the Philips Service portal
(P4S) and contains the following software:
• Process_NVM_LC09Mxxx.bin: mainly for factory use to
load main NVM. Can be used by service if applicable.
• LC09M_VGAxxxx.bin: for loading VGA NVM using
ComPair tool.
• LC09M_HDMIxxxx.bin: for loading HDMI NVM via
ComPair (HDMI MUX EDID) tool.
• The Autorun.upg file, which is available on P4C (the
consumer web site), contains:
– Main SW.
– Standby SW.
– Bootloader SW (via SAM upgradable).
– Ambilight SW (if applicable).
To Next Page