- 15 -
5 Push the two poles together to make one longer pole�
Note: You will hear a small click when they are secure.
6 Then, with the power cord rst, insert the pole through the opening of
the clamp�
7 Align the pole into position by using the dots on the pole and clamp,
and rotate it 45° clockwise to lock it into place.
8 The bottom of the pole is telescopic, so you can extend it down to the
oor.
Make sure to place the power cord in one of the slots provided at the
end of the tube towards a power outlet�
1
2
9 Run the cord where the oor and wall meet.
Using the provided power adapter, attach the cord from the pole and
plug it into a power outlet�
To Next Page