Philips AVENT SCD973 - Charging the Parent Unit

- 20 -
Charging the Parent Unit
The Parent Unit runs ona built-in rechargeable Lithium-ion battery.
Follow the steps below to charge the Parent Unit:
2
1
1 Plug the power adapter into the Parent Unit and the wall socket�
2 The battery status light turns solid orange to indicate that the Parent
Unit is charging�
3 When the battery is fully charged, the battery status light turns to solid
white�
12 hr=3 hr
eco
When you charge the Parent Unit for 3 hours, it can be used cordlessly
for up to 12hours in Eco mode.
If the Parent Unit is switched on during charging, charging takes
approximately twice as long.