Philips BDP9500 - Troubleshooting Common Issues

22
2 Channel analog output•
A
udio Front L + R : 2 Vrms (> 1 kohm)•
Signal to noise ratio: > 120 dB•
Dynamic Range (1kHz): >100 dB•
Total harmonic distortion: <90 dB•
7.1 Channel analog output•
Audio Front L + R : 2 Vrms (> 1 kohm)•
Audio Surrond L + R : 2 Vrms •
(> 1 kohm)
Audio Center : 2 Vrms (> 1 kohm)•
Audio Subwoofer : 1.15 Vrms (> 1 kohm)•
Audio Rear L + R: 2 Vrms (> 1 kohm)•
Digital output: 0.5 Vp-p (75 ohm)•
Optical, Coaxial•
HDMI output•
USB
Compatibility: Hi-Speed USB (2.0)•
Class support: UMS (USB Mass Storage Class)•
Main unit
Power supply rating•
Europe: 220~230V ~AC, 50 Hz•
Asia Pacific: 220~240V ~AC, 50 Hz•
China: 220~240V ~AC, 50 Hz•
Power consumption: 25 W•
Power consumption in standby mode: •
< 0.25 W
Dimensions (w x h x d): 437 x 91 x 268 (mm) •
Net Weight: 4.2 kg•
Accessories supplied
Remote control and batteries•
Audio/Video cables•
Power cable•
Quick start guide•
User manual•
Laser Specification
Laser Type: •
BD Laser Diode: InGaN/AIGaN•
DVD Laser Diode: InGaAIP•
CD Laser Diode: A IGaAs•
Wave length: •
BD: 405 +5nm/-5nm•
DVD: 650 +13nm/-10nm•
CD: 790 +15nm/-15nm•
Output power: •
BD: Max. ratings: 20mW•
DVD: Max. ratings: 7mW•
CD: Max. ratings: 7mW•
8 Troubleshooting
Warning
Risk of electric shock. Never remove the casing of the •
product.
To keep the warranty valid, never try to repair the
product yourself.
2 Download the software into a USB flash drive:
a Un-zip the download, and make sure
that the un-zipped folder is named
“UPG”.
b Put the “UPG” folder in the root
directory.
3 Insert a USB flash drive to the (USB) jack
on this product.
4 In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[USB].
5 Follow the instructions on the TV screen to
confirm update operation.
Once software update is complete, this »
product automatically turns off to standby.
6 Disconnect the power cord for a few seconds
and connect again to turn on this product.
Note
Do not turn off the power or remove the USB flash •
drive when software updating is in progress to prevent
possible damage of this product.
Care
Caution
Never use solvents such as benzene, thinner, cleaners •
available commercially, or anti-static sprays intended
for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.
Specifications
Note
Specification and design are subject to change without •
notice
Video
Signal system: PAL / NTSC•
Composite video output: 1 Vp-p (75 ohm)•
Component video output: 480/576i, 480/576p, •
720p, 1080i
Y: 1 Vp-p (75 ohm)•
Pb: 0.7 V-pp (75 ohm)•
Pr: 0.7 V-pp (75 ohm)•
HDMI output 480p, 576p, 720p, 1080i, 1080p, •
1080p24
Audio
EN