Philips BDS4223V - On-Screen Display Status

User Manual BDS4223V
27
6.5 ON-SCREEN DISPLAY STATUS
The On-Screen Status Display shows detailed information regarding the
operational status of the monitor. The status display automatically
appears whenever there is a change in the state of the monitor such as
channel change or input change. The status display will automatically
disappear after a timeout period.
Showing Display Status
1 Press the DISPLAY key on the remote control to manually show the
Status Display.
Notes:
● When using AV1 and AV2, priority is given to the S-Video input.
● When using S-video connection AV1 and AV2, the status display will
denote "[S]" to indicate the input source is using S-Video connector.
AV Mode
AV CVBS Stereo 16:9 Input Source
PIP
Component Mode
Y Cb Cr Stereo 16:9 Input Source
RGB/DVI Mode
VGA M.21 Stereo 16:9
Input Source
Signal Format