User Manual BDS4223V
37
7.1.6 FINE TUNING RGB MODE
Due to various PC video cards and set-top boxes with differing
specifications, it is likely that the initial video picture have subtle noise or
imperfections. Please use the following procedures to adjust the picture
quality when using under RGB mode.
1 Press the MENU button on the monitor panel or remote control.
2 Use the SEL or SEL key to select the PICTURE option from
the menu.
3 Press the ADJ key to confirm the selection.
=> Various options are available in the PICTURE menu.
4 Use the SEL or SEL key to select the CLOCK PHASE option
from the menu.
5 Press the ADJ key to confirm the selection.
=> The CLOCK PHASE menu appears.
6 Use the ADJ or ADJ key to optimize the video picture.
7 Press the SEL key to confirm setting and return to the previous
menu.
To Next Page
Loading...
