User Manual BDS4223V
43
7.3 SLEEP TIMER
Setting the Sleep Timer Using the OSD Menu
This monitor has a built-in sleep timer function. Once set, the monitor
will automatically shut-off without user intervention.
1 Press the MENU button on the monitor panel or remote control.
2 Use the SEL or SEL key to select the SETUP option from the
menu.
3 Press the ADJ key to confirm the selection.
=> Various options are available in the SETUP menu.
4 Use the SEL or SEL key to select the SLEEPTIMER option.
5 Press the ADJ key to confirm selection.
=> The SLEEP TIMER menu appears.
6 Use the ADJ or ADJ key to change the setting (OFF, 15MIN,
30MIN, 45MIN, 60MIN, 90MIN, 120MIN).
7 Press the SEL key to confirm setting and return to the previous
menu.
Note:
The monitor will function normally until the 1-minute mark. At the 1-
minute mark, the sleep timer will display a second by second countdown
clock to notify that you that the monitor is about to turn off.
To Next Page
Loading...
